Live Map of London Underground... Awesome!

It was going to happen sooner or later, must admit, this is pretty cool:



Comments

Post a Comment

Popular posts from this blog

Asus RT-N56U Router with Stock Firmware & Sky Fibre

Image
Wow, what a nightmare Sky Fibre is. All I wanted to do was replace the crappy Sagem wireless router with my Asus Black Diamond router and it turned out to be a 3 week sprint of reading about Asuswrt, Tomato and udhcpc. Turns out that yes, it's a pain to setup, but it's definitely possible... and with the stock firmware! :-D So, how does it all work? Well, firstly, the Sagem router communicates the with BT OpenReach modem like any other ethernet based device, except it uses MER (MAC Encapsulated Routing) to authenticate the device so that you can't just plug in any old router. What does this actually mean? Well it means the Sagem router sends some very specific information to the OpenReach modem, the client id. This client id is naturally not found in any configuration screen, you have to sniff it out of a DHCP packet to get it. You have to connect your laptop/system via ethernet to the Sagem router and make sure nothing else is connected. Then give your laptop/sy...
Read more

OpenElec & Remote Control Setup

Updated 20/05/2013: Openelec keymaps have moved from /Userdata/keymaps.xml to /Userdata/keymap/keyboard.xml Ok, so thought it would be worth noting this down for others as well. I use a One For All Smart Control  to control my TV, Xbox 360, Surround System and SkyHD box. I figured that it would be a natural extension to include the new ER1401 system into this mix. Note: For those coming straight to this article, this is my system running OpenElec i.e. XBMC, i've written articles before on how you can build one of these systems if you can get the hardware. So, thankfully after a rummage through my "man cupboard" I found a old Microsoft Media Center remote and IR receiver which by luck works out of the box with OpenElec. So I configured my One For All remote control to send Media Center remote control signals and bush bash bosh, I had control of my OpenElec system.
Read more

How To Capture Audio/Video Content From A Console

Image
I posted this on my Uni's website and thought it was worth posting here as well. This howto concentrates on doing this with an xbox 360 using a composite connection. It can also be done with a S-Video connection but won't be covered. Composite: S-Video Step 1: You will need to have a video capture card or a graphics card with a built in VIVO (Video-In Video Out) system or a similar system. My graphics card (GeForce 4 4200) has a built in VIVO connection and came with a cable which allows the connection of a composite video connection (The yellow connector in the left picture above) or a S-Video connection (Pictured on the right). I've seen other graphics cards just come with a Composite Video-In connection, this will work just the same. Step 2: The VIVO system does not handle sound and neither will any graphics cards. The other two connectors on the composite connection (red and white connections above) are the left and right audio. You will need a cable which takes two co...
Read more