Blog Hosting Change

I now blog somewhere else:

Moved to WordPress:

http://linuxfruity.wordpress.com/

Comments

Post a Comment

Popular posts from this blog

Asus RT-N56U Router with Stock Firmware & Sky Fibre

Image
Wow, what a nightmare Sky Fibre is. All I wanted to do was replace the crappy Sagem wireless router with my Asus Black Diamond router and it turned out to be a 3 week sprint of reading about Asuswrt, Tomato and udhcpc. Turns out that yes, it's a pain to setup, but it's definitely possible... and with the stock firmware! :-D So, how does it all work? Well, firstly, the Sagem router communicates the with BT OpenReach modem like any other ethernet based device, except it uses MER (MAC Encapsulated Routing) to authenticate the device so that you can't just plug in any old router. What does this actually mean? Well it means the Sagem router sends some very specific information to the OpenReach modem, the client id. This client id is naturally not found in any configuration screen, you have to sniff it out of a DHCP packet to get it. You have to connect your laptop/system via ethernet to the Sagem router and make sure nothing else is connected. Then give your laptop/sy...
Read more

OpenElec & Remote Control Setup

Updated 20/05/2013: Openelec keymaps have moved from /Userdata/keymaps.xml to /Userdata/keymap/keyboard.xml Ok, so thought it would be worth noting this down for others as well. I use a One For All Smart Control  to control my TV, Xbox 360, Surround System and SkyHD box. I figured that it would be a natural extension to include the new ER1401 system into this mix. Note: For those coming straight to this article, this is my system running OpenElec i.e. XBMC, i've written articles before on how you can build one of these systems if you can get the hardware. So, thankfully after a rummage through my "man cupboard" I found a old Microsoft Media Center remote and IR receiver which by luck works out of the box with OpenElec. So I configured my One For All remote control to send Media Center remote control signals and bush bash bosh, I had control of my OpenElec system.
Read more

eMachines ER1401 Memory Upgrade

Normally I wouldn't write a post for something so trivial such as a memory upgrade. In a normal ATX or AT form factor Desktop PC or even a modern laptop, it normally isn't that difficult to upgrade the system memory. In fact this was one of the first things I learnt to do when playing around with my dad's old system, an Intel 486dx based system with Windows 3.11 installed. However for those who own a ER1401 they will know that it's form factor, case design, etc is compact and I had some challenges while doing the upgrade. Here are some notes for others which if I had known in the first place would have helped me: Please note that this is not a complete list of instructions and that if you attempt to do this, that you may (and probably will) cause some damage to the chassis due to the fact it was never designed to be opened!  I done the whole upgrade i.e. Opening of case, removal of old memory and installation of new and rebuild in around 30 minutes, but if you ...
Read more