Desktop Screenshot 3

So it's been a while since I posted one of these never mind a post. Inspired by you guessed it...

Comments

  1. frank12 March 2007 at 14:12

    cluttered and bland. what the fuck do you need a ruler for

    D-

    ReplyDelete
  2. Author13 March 2007 at 01:15

    It's good to see my no.1 fan is still reading, great to hear from you big g. Normally my desktop doesn't have the screenlets on them, however they add a certain bling to the screenshot even if they are cluttered.

    ReplyDelete
  3. frank13 March 2007 at 12:42

    you've got updates

    ReplyDelete

Post a Comment

Popular posts from this blog

OpenElec & Remote Control Setup

Updated 20/05/2013: Openelec keymaps have moved from /Userdata/keymaps.xml to /Userdata/keymap/keyboard.xml Ok, so thought it would be worth noting this down for others as well. I use a One For All Smart Control  to control my TV, Xbox 360, Surround System and SkyHD box. I figured that it would be a natural extension to include the new ER1401 system into this mix. Note: For those coming straight to this article, this is my system running OpenElec i.e. XBMC, i've written articles before on how you can build one of these systems if you can get the hardware. So, thankfully after a rummage through my "man cupboard" I found a old Microsoft Media Center remote and IR receiver which by luck works out of the box with OpenElec. So I configured my One For All remote control to send Media Center remote control signals and bush bash bosh, I had control of my OpenElec system.
Read more

WOL (Wake on Lan) - eMachine ER1401

Image
Ok, so after the massive success of getting OpenElec up and running with little to no problems I faced what initially seemed like a big problem, but as always once you have a solution, it seems trivial. Within the XBMC Constellation application there is a button on the connection menu to send a WOL (Wake on Lan) or "Magic Packet" to turn on the device which it is controlling XBMC on. Clicking this buttons straight away did nothing except change the label in the menu within XBMC to "Package...". Not informative at all.
Read more

Asus RT-N56U Router with Stock Firmware & Sky Fibre

Image
Wow, what a nightmare Sky Fibre is. All I wanted to do was replace the crappy Sagem wireless router with my Asus Black Diamond router and it turned out to be a 3 week sprint of reading about Asuswrt, Tomato and udhcpc. Turns out that yes, it's a pain to setup, but it's definitely possible... and with the stock firmware! :-D So, how does it all work? Well, firstly, the Sagem router communicates the with BT OpenReach modem like any other ethernet based device, except it uses MER (MAC Encapsulated Routing) to authenticate the device so that you can't just plug in any old router. What does this actually mean? Well it means the Sagem router sends some very specific information to the OpenReach modem, the client id. This client id is naturally not found in any configuration screen, you have to sniff it out of a DHCP packet to get it. You have to connect your laptop/system via ethernet to the Sagem router and make sure nothing else is connected. Then give your laptop/sy...
Read more